Steel products
Castings in carbon, wear-resistant and heat-resistant steels 25L, 35L, 110G13L, 40Kh24N12SL to drawing.
- Heat-resistant and precision alloys
- Alloy and structural steel
- Forgings, castings and stampings
Материал
Carbon steel
Rolled products, pipes and parts in ordinary and quality carbon steel: St3sp, St3ps, steel 10, 20, 35, 45. The most widely used material in construction and mechanical engineering.
104 products in the catalog
Products: Carbon steel
Steel products
Cast steel shot DSL and steel grit DSK for shot blasting.
- Carbon steel
- Parts and components
Pipes
Two-metal pipes: steel with a stainless, copper or aluminium layer.
- Copper
- Stainless steel
- Pipes and tubes
Steel products
Grinding balls 20–120 mm for ball mills, hardness groups 1–5 to GOST 7524-2015.
- Alloy and structural steel
- Carbon steel
- Parts and components
Pipes
Finned tubes with a steel base and extruded aluminium fins for heat exchangers.
- Aluminium and its alloys
- Carbon steel
- Pipes and tubes
Steel products
Steel bushings and sleeves from tube, bar and forgings, to drawing and in standard sizes.
- Alloy and structural steel
- Carbon steel
- Parts and components
Wire and electrodes
Copper-clad steel BSM and aluminium-clad steel wire for telecom lines, railway signalling and earthing.
- Copper
- Carbon steel
- Wire
Equipment
Industrial agitators for tanks and reactors with drive, shaft, impeller and mounting assembly.
- Stainless steel
- Carbon steel
- Equipment
Wire and electrodes
Wire in unalloyed electrical steel 10880 and 20880 for magnetic cores.
- Carbon steel
- Wire
Steel products
Bow-spring and rigid centralisers TsTs, TsPN, TsZh for centring casing strings in a well.
- Carbon steel
- Parts and components
Equipment
Screw piles and steel tubular piles for foundations, fences, piers and supports.
- Alloy and structural steel
- Carbon steel
- Equipment
- Pipes and tubes
Equipment
Shafts, gears, sprockets, bushings, pulleys and other equipment parts made to drawings and samples.
- Alloy and structural steel
- Carbon steel
- Parts and components
- Equipment
Steel products
Welded and press-locked grating, stair treads and platforms in black, galvanised and stainless steel.
- Stainless steel
- Galvanised steel
- Mesh and gratings
Long products
Plain rebar A240 of 6–40 mm in St3 for stirrups, loops, embedded parts and anchors.
- Carbon steel
- Rebar and wire rod
Fasteners
Hex head bolts to GOST 7798-70, DIN 933 and 931, property classes 5.8, 8.8, 10.9, M6–M48.
- Alloy and structural steel
- Carbon steel
- Fasteners and rigging
Mounting tape
Cold-rolled packing strap 0.5–1 × 16–32 mm to GOST 3560-73 for strapping metal and cargo.
- Carbon steel
- Tapes and foil
Sheets, plates and strips
Hot-rolled steel sheet 1.5–160 mm to GOST 19903-2015 in St3, 09G2S, steels 20 and 45.
- Alloy and structural steel
- Carbon steel
- Sheets, plates and coils
Wire and electrodes
Carbon spring wire to GOST 9389-75 and alloy 60S2A, 51KhFA Ø 0.2–12 mm.
- Alloy and structural steel
- Carbon steel
- Wire
Pipe fittings
Steel running nipples, barrel nipples, threaded pipe ends and couplings DN 15–50 for threaded VGP pipe joints.
- Galvanised steel
- Carbon steel
- Valves and fittings
Pipes
Square tube 10×10–300×300 mm to GOST 30245-2003 and 8639-82 in St3 and 09G2S.
- Alloy and structural steel
- Carbon steel
- Pipes and tubes
Structural sections
Hot-rolled channel with tapered (U) and parallel (P) flanges, No. 5–40, to GOST 8240-97.
- Carbon steel
- Beams, sections and rails
Fasteners
Hex nuts to GOST 5915-70 and DIN 934, self-locking DIN 985, high, cap and flange nuts.
- Carbon steel
- Fasteners and rigging
Sheets, plates and strips
Cold-rolled sheet 0.35–4 mm to GOST 19904-90 in 08ps and 08Yu for pressing, bending and painting.
- Carbon steel
- Sheets, plates and coils
Pipes
Rectangular tube 15×10–400×200 mm to GOST 30245-2003 and 8645-68 for beams and frames.
- Alloy and structural steel
- Carbon steel
- Pipes and tubes
Carbon steel: what to know
Carbon steel welds, cuts and bends well and remains the most affordable structural material. St3sp and steel 20 are used for load-bearing structures, steel 45 for shafts, axles and parts that are heat-treated. We select the grade for the load and processing method and supply the batch with a quality certificate.
Материалы
- Stainless steel64
- Alloy and structural steel59
- Aluminium and its alloys54
- Galvanised steel38
- Brass29
- Copper29
- Non-metallic materials23
- Rare earth metals16
- Refractory and rare metals14
- Nickel and copper-nickel alloys13
- Heat-resistant and precision alloys12
- Lead, zinc, tin, cadmium11
- Titanium9
- Bronze8
- Cast iron8
- Polymers (PP-R, PE, PVC)7
- Tool and high-speed steel6
- Ferroalloys and master alloys3
- Magnesium1
We will price your quantity
Send a specification or describe your task: a manager will select the products and equivalents and prepare an offer with VAT.